Yuba is an essential bathroom appliance for the bathroom. It can radiate the heat you want in the cold winter to ensure that you enjoy the comfort process during the bathing process. Regardless of the item, if it is used for a long period of time, or if it is used improperly, there will be some malfunctions, such as the fact that the Yuba exhaust fan does not turn. Then, what if the Yuba exhaust fan does not turn? Today, GELAN Xiaobian will share with you the repair method of the Yuba exhaust fan.
1, the motor is broken
Under normal circumstances, it is necessary to remove the inspection before it can be judged. Generally, it is most likely that the motor will not be smothered for a long time. You can turn it by hand and try it. Because it is used too little, it is often in the humid environment of water vapor. As a key component of Yuba, the motor is not directly observable in appearance, so it has long been ignored by consumers. Generally, there will be no major problems in a short period of time, because its main function is ventilation and ventilation. Due to the length of use and the environment, the exhaust fan will cause the shaft to rust and squeak (with a click), and the winding will burn out for a long time (no humming). For safety reasons, it is recommended that you replace the exhaust fan as soon as possible.
As for the motor does not turn, basically the resistance type will not cause problems, the problem is on the motor, not the line is broken, or the motor is burnt out. As for the problem of judging the motor or the resistance, it can only be judged by removing the inspection. It can also be removed and added with some lubricant.
2, the exhaust fan has sound
Yuba exhaust fan has sound. Under normal circumstances, there will be no big problem in a short time, because its main function is ventilation and ventilation. Because the exhaust fan is often used in a humid environment for a long time, it will cause the shaft to rust. Stuck.
3, Yuba capacitor is broken
If the capacitor in the Yuba is broken, you need to replace the capacitor. You need to buy a new one in advance, or go directly to a special maintenance person.
4, Yuba motor is broken
If the motor in the Yuba motor is broken, it needs to be repaired.
5, circuit failure
There may be a fault in the installation of the Yuba, the wiring is not connected, or the contact is poor, etc. This needs to be checked after the circuit is repaired.
The above is to repair the 5 different faults of the Yuba exhaust fan, I hope that it will help you more, and the related Yuba information comes from the official website of GELAN Electric.
Zhejiang GeLan Electric Co., Ltd.