Yuba use precautions

Editor:Switch socket manufacturers _ switch socket join agent _ Yuba join agent _ Zhejiang GELAN Electric Co., Ltd. │ Release Time:2019-04-08 

With the improvement of living standards, Yuba has become the standard distribution distributor for most people's homes. Everyone knows that when Yuba bathes in the winter, it can bring us warmth, and some air heaters also have functions such as purifying air. However, how many people know about the use of Yuba? Let's take a look with Xiaobian now!

浴霸使用注意事项

1, the power wiring system should be standardized


Yuba's power can be up to 1100W or above. Therefore, the power supply wiring of the Yuba must be waterproof. It is best to have a multi-wire copper core wire of not less than 1mm. All power wiring must be placed in a plastic concealed tube. There must be no open line setting, Yuba power control switch must be qualified with waterproof 10A or more capacity, especially the old house bathroom installation bath is more important to regulate.


2, the thickness of Yuba should not be too large


In the installation problem, consumers must pay attention to the thickness of the Yuba when buying, generally about 20 cm. Because the Yuba should be installed on the roof, if you want to install the Yuba, you must add a layer below the roof, which is the integrated ceiling we often say, so that the latter part of the Yuba can be sandwiched between the two tops. If the Yuba is too thick, the decoration will be difficult.


3, should be installed in the center of the bathroom


Many homes install it above the bath or shower, so the surface looks hot in the winter but there are security risks. Because the infrared radiation lamp heats up quickly, it is too close to burn the human body. The right approach should be to install the Yuba in the center of the top of the bathroom, or slightly closer to the bathtub, so that it is both safe and functional.


4. Do not spray with water during work.


Special care should be taken when using it: Although the current Yuba is waterproof, it must not be splashed with water during actual use. Although Yuba's waterproof bulb has waterproof performance, the metal fittings in the body can't do this. That is to say, the metal in the body is still electrically conductive. If it is splashed with water, it may cause a short circuit of the power supply.


5, avoid frequent switching and vibration


Usually, you can not switch the Yuba frequently. When the Yuba is running, avoid large vibrations around it, otherwise it will affect the service life of the heating bulb. If an abnormal situation occurs during operation, it should be stopped immediately, and it is not allowed to be dismantled and repaired by yourself. Be sure to have the professional technicians in the after-sales service department in charge to repair it.


6, Keep the bathroom clean and dry


After the bath is finished, do not turn off the Yuba immediately. Wait until the moisture in the bathroom is drained and then turn it off. Always keep the bathroom ventilated, clean and dry to extend the service life of the Yuba.


The above points are the need to pay attention to the use of Yuba, I hope to help everyone. Want to know more about Yuba information, please continue to pay attention to GELAN electrical official website.


CONTACT

Fax:0086-573-83250880 Service Hotline:0086-573-83250886 83250887 Free Service Hotline:400-008-7727 E-mail:gelancn@126.com Address:No. 459, Qingyuan Road, Wangdian Town, Jiaxing City, Zhejiang Province
Follow us

Zhejiang GeLan Electric Co., Ltd.

技术支持 谷美科技

在线咨询

联系电话

400-008-7727